BrakeAway MC CruiseControl
Mekanisk Cruise Control fra Amerikanske BrakeAway.
Testet til rigtig mange MC modeller. Se under mærket.
BEMÆRK at det er en af de få (måske eneste) Cruise Controls der "afbryder" når du tager forbremsen !! hvilket klart forbedrer sikkerheden ved kørsel med Cruise Control.
WARNING - Do not attempt to install this product on any vehicle which has not been tested, approved and listed. BrakeAway Products Inc. and all affiliated manufacturers, dealers and or distributors will not be held liable for property damage or bodily harm resulting from any improper use, installation or application of this device.
Lækker amerikansk mekanisk CruiseControl til motorcykler
FITLIST:
Fit List
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
|---|---|---|---|---|---|
Harley DavidsonFits most Harley Davidson Motorcycles with throttle cables
| 1996 to present | *Will not work with Fly By Wire. *Will not work if turn signal mount covers bottom of pivot pin for front brake lever. *Will work with Harley Heated grips but cruise control needs to be installed first*Will not fit Street 500 & 750 | 1.0″ | 7CP06 | $209.00 |
| Safety Warning! Heated grips with wire protruding from the grip flange are not compatible with any of the following Models listed below this line. The protruding wire has the potential of becoming entangled in the cruise control components when you turn the throttle which could cause the throttle to hang up and stick open. | |||||
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Honda | 1996 & Newer | 7CP02 and 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips 7CP01 and 7CP04- Slips over 1 3/8″ to 1 1/2″ diameter throttle grips | |||
| Fury | 1.0” | 7CP01 | $179.00 | ||
| Interstate | 2010 & newer | Requires P/N 5C23 Turn Limiter so cruise control does not hit the gas tank | 1.0” | 7CP01 | $179.00 |
| Magna | 1.0” | 7CP01 | $179.00 | ||
| Sabre | 2010 & newer | Requires P/N 5C23 Turn Limiter | 1.0” | 7CP01 | $179.00 |
| Shadow | Fits All Shadow Models | 1.0” | 7CP01 | $179.00 | |
| Stateline | 2010 & newer | Requires P/N 5C23 Turn Limiter | 1.0” | 7CP01 | $179.00 |
| Valkyrie | All Years | Fits all models except the Interstate | 1.0” | 7CP01 | $179.00 |
| VLX | 1.0” | 7CP01 | $179.00 | ||
| VTX | 1.0” | 7CP01 | $179.00 | ||
| CB1100 | 2013 & newer | 7/8” | 7CP02 | $179.00 | |
| CB500 | 2013 & newer | 7/8” | 7CP02 | $179.00 | |
| CB650 | 2018 & Newer | 7/8″ | 7CP02 | $179.00 | |
| CTX700 | Including Dual Clutch | 7/8” | 7CP02 | $179.00 | |
| CTX1300 | N/A | 7CP05 | $179.00 | ||
| Forza 300 | 7/8” | 7CP02 | $179.00 | ||
| NC700 & NC750 | 7/8” | 7CP02 | $179.00 | ||
| NT700 | 7/8” | 7CP02 | $179.00 | ||
| ST1100 | 7/8” | 7CP05 | $179.00 | ||
| ST1300 | 7/8” | 7CP05 | $179.00 | ||
| Silverwing | N/A | 7CP05 | $179.00 | ||
| F6B Goldwing | Standard Only (No Heated Grips) | N/A | 7CP05 | $179.00 | |
| Africa Twin | 7/8″ | 7CP02 | $179.00 | ||
| Rebel | 2017 & Newer | 300 & 500 | 1.0″ | 7CP01 | $179.00 |
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Kawasaki | 1996 & Newer | 7CP02 and 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips 7CP01 and 7CP04- Slips over 1 3/8″ to 1 1/2″ diameter throttle grips | |||
| Vulcan 1” bars | Fits all Vulcan Models with 1” Handlebars | 1.0” | 7CP01 | $179.00 | |
| Vulcan 7/8” bars | Fits Vulcan S & all others with 7/8” Handlebars | N/A | 7CP05 | $179.00 | |
| Ninja | 7/8” | 7CP02 | $179.00 | ||
| Versys | 7/8” | 7CP05 | $179.00 | ||
| ZX10R | 7/8” | 7CP02 | $179.00 | ||
| ZX14 | 7/8” | 7CP02 | $179.00 | ||
| Z650 thru Z900 | N/A | 7CP05 | $179.00 | ||
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Suzuki | 1996 & Newer | 7CP02 and 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips 7CP01 and 7CP04- Slips over 1 3/8″ to 1 1/2″ diameter throttle grips | |||
| Boulevard | 1.0” | 7CP01 | $179.00 | ||
| Intruder | 1.0” | 7CP01 | $179.00 | ||
| Intruder Volusia | 1.0” | 7CP01 | $179.00 | ||
| Marauder | 1.0” | 7CP01 | $179.00 | ||
| Savage | 1.0” | 7CP01 | $179.00 | ||
| Bandit | 7/8” | 7CP02 | $179.00 | ||
| Gladius | 7/8” | 7CP02 | $179.00 | ||
| Hayabusa | 7/8” | 7CP02 | $179.00 | ||
| SV650 | 7/8” | 7CP02 | $179.00 | ||
| SV1000 | 7/8” | 7CP02 | $179.00 | ||
| V-Strom | 7/8” | 7CP02 | $179.00 | ||
| Burgman | N/A | 7CP05 | $179.00 | ||
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Triumph | 1996 & Newer | 7CP02 and 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips 7CP01 and 7CP04- Slips over 1 3/8″ to 1 1/2″ diameter throttle grips | |||
| America | N/A | 7CP05 | $179.00 | ||
| Bonneville | Including T100 & T120 | N/A | 7CP05 | $179.00 | |
| Rocket III | All Rocket III Models | N/A | 7CP04 | $179.00 | |
| Thunderbird | N/A | 7CP04 | $179.00 | ||
| Thruxton | 2009 & newer | N/A | 7CP05 | $179.00 | |
| Street Triple | 2008 to 2016 | 7/8” | 7CP02 | $179.00 | |
| Speed Triple | 1998 & newer | 7/8” | 7CP02 | $179.00 | |
| Tiger | *1996 & newer | N/A | 7CP05 | $179.00 | |
| Scrambler | 2006 & newer | 7/8” | 7CP02 | $179.00 | |
| Speed Four | N/A | 7CP05 | $179.00 | ||
| Speedmaster | N/A | 7CP05 | $179.00 | ||
| Sprint ST | N/A | 7CP05 | $179.00 | ||
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Victory | 1996 & Newer | 7CP02 and 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips 7CP01 and 7CP04- Slips over 1 3/8″ to 1 1/2″ diameter throttle grips | |||
| All Models | Thru 2007 | 1.0” | 7CP01 | $179.00 | |
| Octane | N/A | 7CP05 | $179.00 | ||
| All Models | Any Year | With 1″ or 1 ¼” Handlebars | N/A | 7CP04 | $179.00 |
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Yamaha | 1996 & Newer | 7CP02 and 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips 7CP01 and 7CP04- Slips over 1 3/8″ to 1 1/2″ diameter throttle grips | |||
| Bolt | 1.0” | 7CP01 | $179.00 | ||
| Raider | 1.0” | 7CP01 | $179.00 | ||
| Road Star | 1.0” | 7CP01 | $179.00 | ||
| Road Star Warrior | 1.0” | 7CP01 | $179.00 | ||
| Royal Star | 1.0” | 7CP01 | $179.00 | ||
| Roadliner | N/A | 7CP04 | $179.00 | ||
| Stratoliner | N/A | 7CP04 | $179.00 | ||
| Stryker | 1.0” | 7CP01 | $179.00 | ||
| V-Star | 1.0” | 7CP01 | $179.00 | ||
| FZ1 | 7/8” | 7CP02 | $179.00 | ||
| FZ6 | 7/8” | 7CP02 | $179.00 | ||
| FJR | 7/8” | 7CP02 | $179.00 | ||
| Super Tenere | 7/8” | 7CP02 | $179.00 | ||
| FJ-09 | 7/8” | 7CP02 | $179.00 | ||
| FZ-07 | N/A | 7CP05 | $179.00 | ||
| FZ-09 | N/A | 7CP05 | $179.00 | ||
| FZ-10 | N/A | 7CP05 | $179.00 | ||
| Tracer 900 | 2017 & Newer | Not compatible with GT model | 7/8″ | 7CP02 | $179.00 |
| VMax | 2009 & Newer | 7/8″ | 7CP02 | $179.00 | |
| Make Model | Year Range | Comments | Handlebar Diameter | MSRP | |
Indian | 7CP05 -Slips over 1.125” to 1.34” diameter throttle grips | ||||
| Scout | 2015 & Newer | Will not fit over the end of Indian oversize grips. | N/A | 7CP05 | $179.00 |